CTE E600 MX Hydrangea Blue Mid Tower Chassis-

1. Floating GPU: Placing the GPU in the middle of the chassis by using the enclosed floating GPU bracket and pre-configured 400mm long PCI-e 4.0 riser cable
2. Up Right: Hanging the GPU vertically
3. Up Right Forward: Placing it up-right with the graphics card facing forward to the side panel on the rotational PCI-e slots

Furthermore, the CTE E600 MX comes with two interchangeable front panels in one package for you to swap anytime. One is a tempered glass panel, with crystal clear glass combined with a TG panel on the left side, providing an ultra-wide viewing angle to fully display your internal configuration; the other is a perforated panel which is designed for those who pursue superior airflow.

The dual chamber design of the CTE E600 MX separates the right chamber specifically for cable management. With Velcro straps and cable ties in the accessory box, users can easily tie things up on the numerous anchor points located in the right chamber for better cable management. The huge and clean space of the left chamber allows for tidier component placement and improves the airflow. Additionally, the CTE E600 MX can accommodate up to twelve 140mm fans plus two 120mm fans or support up to a 420mm radiator at the front, rear, or motherboard side, offering an exceptional cooling solution. Equipped with removable dust filters on all ventilation, this chassis can prevent thermal issues caused by dust alerts.

The CTE E600 MX, a new member of the CTE series, brings not only an optimal cooling performance to critical components, but also a new three-way GPU installation and an interchangeable dual front panel design. With the classic CTE Form Factor and tremendous installation flexibility, the CTE E600 MX keeps it cool and keeps it sleek!

Features of the CTE E600 MX Mid Tower Chassis
CTE Form Factor
The CTE Form Factor Designed by Thermaltake, stands for Centralized Thermal Efficiency, and is focused around providing high level thermal performance to critical components. The design utilizes a 90-degree rotation of the motherboard providing more efficient airflow pathways.

Move Critical Heat Sources (CPU And Graphic Cards) Closer Towards Cool Air
Since the CPU location of the CTE E600 MX has been moved much closer to the front panel and the graphics card moved closer towards the rear panel, independent cold air induction is given for thermal dissipation of the CPU and graphics card respectively.

Three-Way GPU Installation
There are three different ways to mount your graphics card: The first way, the enclosed floating GPU bracket and the pre-configured 400mm long PCI-e 4.0 riser cable enables the graphics card to sit in the middle of the chassis, giving your battle station an unconventional look; the second way is to rotate the motherboard 90 degrees so that the GPU is naturally up-right in the chassis; lastly, use the rotational PCI-e slots so that your up-right GPU is facing toward to the side panel.

PCI-e 4.0 Riser Cable 400mm
The riser cable complies with the PCI-e 4.0 Standard, offering a 16GT/s transfer rate and supporting up to 64 GB/s (bi-directional) data transmission. The pre-configured cable eliminates any potential issues you might encounter during system assembly, and enhances the floating GPU configuration through the inclusion of a dedicated floating GPU bracket.

Dual Interchangeable Front Panels
The CTE E600 MX offers two interchangeable front panels: a tempered glass panel and a perforated panel. The crystal clear glass combined with the left side TG panel provides an ultra-wide viewing angle. If you are pursuing maximum airflow, the perforated panel combined with a fan bracket allows you to install additional three 140mm fans or one more 420mm radiator at the front.

All Your Dream Cooling Components Can Fit!
The CTE E600 MX Mid Tower Chassis comes with an enormous capacity for fan installation: up to twelve 140mm fans or fourteen 120mm fans can be installed on various spots. Additionally, the chassis can also support up to 420mm radiators in the front, rear, or motherboard side. The front and bottom fan brackets provide an easy and friendly installation experience.

Optimal Cable Management
Thanks to the dual chamber design, the CTE E600 MX offers ample space in the right chamber for effective cable management. Numerous anchor points are available in this chamber, complimented by Velcro straps and cable ties from the accessory box to ensure a neat and organized setup!

Perfect Dust Protection
The chassis features fine removable filters at the top, front, bottom, rear, and right side offering excellent protection against dust, and are easily removable for convenient cleaning.

Handy I/O Ports
Two USB 3.0 ports, one USB 3.2 Gen 2 Type-C, and HD Audio ports are placed on the top panel to grant direct access when needed.